CLEANOUTS

A floor cleanout is a drain set into the floor of commercial residential buildings to allow a cleaning rod to be inserted into the drain to remove blockages. Cleanouts can be set in concrete, tile or other types of floors for this purpose. When installing a cleanout, there are a number of guidelines and tips for proper installation.

Cleanouts need to be installed near sinks and other drains so they can be cleaned. Additionally, any change in pipe direction greater than 60 degrees should have a cleanout. The size of the pipe determines the size of the cleanout; however, pipes greater than 4 inches in diameter may have a cleanout that’s only 4 inches in diameter.

Clean outs are produced from SS304 grade material which can provide better corrosion control performances

Categories: ,

Description

DIMENSIONS (mm)

d (BSPT) D1 D2 H1 H2
63 sq x 40 1-1/2” 63 37 20 2.5
79 sq x 50 2” 79 47 20 2.5
109 sq x 75 3” 109 73 21 2.5
150 sq x 50 4” 150 96 23 2.5
200 sq x 100 4” 200 96 23 2.5
200 sq x 150 6” 200 137 36 4

DRAWING

SPECIFICATIONS

POLISHED STAINLESS STEEL
SATIN STAINLESS STEEL
BRASS PLATED

PIPE SIZES: Available In 2”, 3”, 4” & 6”

CODE DESCRIPTION:

WT – CO – 664 – T – SSS(WILSON TAYLOR – CLEAN OUTS – 6”X6” TOP SIZE FOR 4” PIPE – THREADED – SATIN STAINLESS STEEL)

MODEL NOS:

WT – CO – 442 – T – SSS WT – CO – 442 – T – PSS WT – CO – 442 – T – BP
WT – CO – 662 – T – SSS WT – CO – 662 – T – PSS WT – CO – 662 – T – BP
WT – CO – 443 – T – SSS WT – CO – 443 – T – PSS WT – CO – 443 – T – BP
WT – CO – 663 – T – SSS WT – CO – 663 – T – PSS WT – CO – 663 – T – BP
WT – CO – 664 – T – SSS WT – CO – 664 – T – PSS WT – CO – 664 – T – BP
WT – CO – 884 – T – SSS WT – CO – 884 – T – PSS WT – CO – 884 – T – BP

DIMENSIONS (mm)

d D1 D2 H1 H2
63 sq x 40 43.5 63 48 20 2.5
79 sq x 50 56.5 79 59 20 2.5
109 sq x 75 82.5 109 86 21 2.5
150 sq x 50 110.5 150 59 20 2.5
150 sq x 75 82.5 150 86 21 4
150 sq x 100 110.5 150 110 23 2.5
200 sq x 100 110.5 200 110 36 4
200 sq x 150 160.5 200 162 36 4

DRAWING

SPECIFICATIONS

POLISHED STAINLESS STEEL
SATIN STAINLESS STEEL
BRASS PLATED

PIPE SIZES:Available In 2”, 3”, 4” & 6”

CODE DESCRIPTION:

WT – CO – 664 – SSS(WILSON TAYLOR – CLEAN OUTS – 6”X6” TOP SIZE FOR 4” PIPE – SATIN STAINLESS STEEL)

MODEL NOS:

WT – CO – 442 – SSS WT – CO – 442 – PSS WT – CO – 442 – BP
WT – CO – 662 – SSS WT – CO – 662 – PSS WT – CO – 662 – BP
WT – CO – 443 – SSS WT – CO – 443 – PSS WT – CO – 443 – BP
WT – CO – 663 – SSS WT – CO – 663 – PSS WT – CO – 663 – BP
WT – CO – 664 – SSS WT – CO – 664 – PSS WT – CO – 664 – BP
WT – CO – 884 – SSS WT – CO – 884 – PSS WT – CO – 884 – BP

DIMENSIONS (mm)

d D1 D2 H1 H2
63 sq x 40 40 63 37 20 2.5
79 sq x 50 51 79 47 20 2.5
109 sq x 75 77 109 73 21 2.5
150 sq x 100 103 150 96 23 2.5
200 sq x 100 103 200 96 23 2.5
200 sq x 150 146 200 137 36 4

DRAWING

SPECIFICATIONS

POLISHED STAINLESS STEEL
SATIN STAINLESS STEEL
BRASS PLATED

PIPE SIZES: Available In 2”, 3”, 4” & 6”

CODE DESCRIPTION:

WT – CO – 664 – PF – SSS (WILSON TAYLOR – CLEAN OUTSV – 6”X6” TOP SIZE FOR 4” PIPE – PUSH FIT – SATIN STAINLESS STEEL)

MODEL NOS:

WT – CO – 442 – PF – SSS WT – CO – 442 – PF – PSS WT – CO – 442 – PF – BP
WT – CO – 662 – PF – SSS WT – CO – 662 – PF – PSS WT – CO – 662 – PF – BP
WT – CO – 443 – PF – SSS WT – CO – 443 – PF – PSS WT – CO – 443 – PF – BP
WT – CO – 663 – PF – SSS WT – CO – 663 – PF – PSS WT – CO – 663 – PF – BP
WT – CO – 664 – PF – SSS WT – CO – 664 – PF – PSS WT – CO – 664 – PF – BP
WT – CO – 884 – PF – SSS WT – CO – 884 – PF – PSS WT – CO – 884 – PF – BP

There are no reviews yet.

Be the first to review “CLEANOUTS”

Your email address will not be published. Required fields are marked *

Related products